Please send us your component drawing showing the following details:

1. Which surfaces are to be machined?

   (Please indicate in drawing)

   
   

2. Clamping diameter with tolerance:

   (For multiple clampings or family of parts, please mark appropriately in the drawings.)

    

   
   

3. Which end surface can be used as an axial backstop?

   (Please indicate in drawing)

   
   

4. Permissable TIR between clamping diameter and machined diameters:

    

    

5. Material:

    

   
   

6. Hardened:

    

    yes   no

   
   

7. Number to be machined per year:

    

   
   

8. Does the backstop surface run true in relation to the clamping diameter?

    

    yes   no

    

Clamping tool is intended for:

 turning

 boring

 milling

 grinding

 balancing

 inspection

Max. Speed:

min^-1

How many tools are engaged simultaneously?

(Please enter in the component drawing and mark tools I, II, III, IV etc.)

Machine tool manufacturer and type of machine:

Component axis:

 horizontal

 vertical

Mounting of clamping fixture:

 between centres

 flange mounted

 taper mounted

Tailstock with life centre:

 yes

 no

Standard designation of spindle flange, mounting taper:

or drawing of spindle head, if necessary with connecting dimensions for pull or pushrod.

Max. load capacity of the spindle:  kg

Adjustment range of power actuation device:

pullforce from N to N

pullforce from N to N

Clamping actuation:

 manual

 power actuation (in machine spindle)

 by a central spring pack

 double acting piston implemented into clamping fixture

Unclamping:

 manual

 by cylinder in the machine spindle

 hydraulically (by single acting piston)

Formatos de archivo permitidos: JPEG, GIF, PNG, TIFF, PDF, AutoCAD, STEP, DXF, XLS, DOC, TXT

(tamaño máximo del archivo: 30 MB)